Other

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Alloy construction - Great for Cruiser or BMX bar conversions

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

Heavy duty bolt-on aluminum seatpost clamp.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Replacement lower hardware for Rockshox forks.

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

- Type: Headset bearing - Discipline: Road, MTB - Material: Steel - Weight: 26g - Dimension: 1-1/4-inch - Bearing Type: ACB - Angle: 45° x 45°

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

- AL6061-T6 alloy seatpost clamp - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seat post and steel frame - 29.8mm for 27.2mm seat post and chromoly frame - 31.8mm for 27.2mm seat post and aluminum frame - 34.9mm for 30.9mm seat post and aluminum frame, or 31.6mm seat post and carbon frame - 16mm height

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

RockShox 32mm Seal Kit

Replacement lower hardware for Rockshox forks.

Replacement lower hardware for Rockshox forks.

Replacement lower hardware for Rockshox forks.

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

RockShox 32mm Seal Kit

- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm