Other
$1.65
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$4.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$6.99
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$9.99
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$10.25
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
$11.00
- Width: 5.8 mm
- Drivetrain Speeds: 11
- Color: Silver
- Reusable: No
$11.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
$11.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$11.99
- Type: Headset bearing
- Discipline: Road, MTB
- Material: Steel
- Weight: 26g
- Dimension: 1-1/4-inch
- Bearing Type: ACB
- Angle: 45° x 45°
$12.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$13.60
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$13.99
- AL6061-T6 alloy seatpost clamp
- Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts
- 28.6mm for 25.4mm seat post and steel frame
- 29.8mm for 27.2mm seat post and chromoly frame
- 31.8mm for 27.2mm seat post and aluminum frame
- 34.9mm for 30.9mm seat post and aluminum frame, or 31.6mm seat post and carbon frame
- 16mm height
$14.18
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$14.18
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$14.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$14.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$14.99
RockShox 32mm Seal Kit
$14.99
Replacement lower hardware for Rockshox forks.
$15.00
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$15.99
RockShox 32mm Seal Kit
$16.00
- Compatible with KMC, Shimano 10 speed chains
- DLC Coated
- Reusable
- No Tool Required
- Card of 2 pairs
$16.99
QUICK-LINK
FEATURE
- Tool-free assembly (possible)
- Non-reusable
- TL-CN10
BENEFIT
- Easy connect
- Compatible with current 11-speed chains
- Quick assembly tool
Page 1 of 3
Next page